Introduction
is used for grinding the barite, limestone, kaolin, ceramics and slags, etc, with the hardness below scale 9.3 of Mohs and 280-odd sorts of non-inflammable and non-explosive stuff in the trades of mining, metallurgical industry, chemical engineering and building material for high fine powder generation and processing. The product size is adjustable in the range of 80-425 (1000 the finest) meshes. It is possible to produce 30-80 mesh coarse powder through special device in the machine.
Specification
|
Parameter
Type |
High-strength96 |
High-strength95 |
High-strength93 |
High-strength86 |
High-strength83 |
| Particle size of feed (mm) |
<=25 |
<=15 |
<=25 |
<=20 |
<=20 |
| Particle size of finished product(mm) |
0.125-0.044 |
0.125-0.044 |
0.613-0.013 |
0.125-0.044 |
0.125-0.044 |
| shift output at different material fine degree |
4-55 |
3-38 |
3.5-40 |
3-33 |
3-31 |
| Rotate speed if central shaft (r/min) |
130 |
130 |
160 |
160 |
160 |
| Inner diameter of pulverzing ring (mm) |
970 |
950 |
910 |
830 |
830 |
| Diameter of pulverzing roller(mm) |
320 |
310 |
300 |
270 |
270 |
| Height of pulverizing ring(mm) |
160 |
170 |
160 |
150 |
150 |
| Electrical machine of main frame |
y225m-4-45 |
y225s-4-37 |
y225m-8-30 |
y225m-8-22 |
y225m-8-22 |
| Electrical machine of blower |
y200L-4-37 |
y200L-4-30 |
y180m-2-22 |
y160E-4-15 |
y160E-4-15 |
| Electrical machine of analyzer |
yc120-4A-5.5 |
yc122-4A-5.5 |
y112m-6-3 |
y112m-6-2.2 |
y112m-6-2.2 |
Technical parameters are subject to change without notice.
